HENGLONG RC MADE TRUCK SERIES

Posted by rc modifications

Thursday, August 11, 2011

Henglong MAD TRUCK RC truck series

Specification of RC Gear Ratio 10.3:1 Scale: 1:10 Length: 16" (406mm) Width: 10" (254mm) Height: 8" (203mm) Wheelbase: 12" (305mm) Tires: 120 x 65mm Motor: Type 550-Class

Nitro RC

Once when we run the rc car, you should remove the remaining fuel from the fuel tank, or try the fuel does not go into the carburetor.
clean fuel from the engine as well, because if there was still some fuel in the engine, can clog and make it difficult to restart, and it is recommended if the machine will rest in a relatively long period of time.
clean the dirt outside the machine using methanol and a brush. Do not let the fire or the excessive heat sources of in time to clean moreover on methanol because methanol is highly flammable! This can cause a fire!
Optimal settings can be varied, all depends in quality of the plugs and methanol of used.
higher level nitro in methanol can improve the performance of engines that can quickly maximize engine power on, but if too high level nitro in methanol, can also causes engine will heat up quickly, and when used in a long time, can causes engine was damaged, you should customize your level nitro engine used methanol with, primarily piston is used, because the pistons of excellent quality, will be much longer the use and more resistant to over heat

Novarossi NSR12S 5 Port

This machine is a machine made in italy Uses aluminum material pistons, piston sleeves using chrome covered brass of materials in order to have a better engine durability. Addition the system slide carburetor, crankshaft with a big ventures and turbo spark plugs so as to increase the to maximize flow of fuel with a mixture of methanol with air quality It is appropriate to use for RC Car 1 / 10 2.1cc engine capacity, with diameters 13.8mm x 14.04mm, has 5 holes flush and size 5.4mm carburetor, so as to produces maximum power at spin 1.62hp x 43000rpm

HPI engine T 15

This is a tight engine and high torque. This machine is a machine Made in Taiwan. Optimized for use on Car and Truck Racing, 2.5cc capacity, diameter measures 15.0mm x 13.6mm, 3 holes rinse, 6mm carburettor produces maximum power 1.2 hp at 29,000 rpm rotation. Relying on aluminum for the body and piston, brass sleeve with chrome coating for high resistance, sliding carburetor, plugs standard, crankshaft with a big hole for increase the flow of fuel mixture. HPI engine is very easy for the settings, so we can customize the engine to the race conditions and also the temperature around the race

HENGLONG RC MADE TRUCK SERIES

3 Responses to "HENGLONG RC MADE TRUCK SERIES"

Footer Text

Footer Text

Footer Text

Footer Text